<DIV style="font-family:Arial, sans-serif; font-size:10pt;">From: Richard Kern via Harc <harc@humboldt-arc.org><BR>To: HARC <harc@humboldt-arc.org><BR>Cc: Richard Kern@reninet.com><BR><DIV><BR></DIV><DIV>I need some assistance with a 2-meter home made dipole.</DIV><DIV><BR></DIV><DIV><DIV>I returned by  Btech dual band transceiver to the seller because it 
stopped transmitting.  They've did the repair/replacement and sent it  back, telling me I killed my 
first one with an antenna that was out of tune.</DIV><DIV><BR></DIV><DIV>According
 to my NanoVNA, it's under 1.5 swr throughout the 144-148 range in which I 
operate.  I did one 10 second transmit on the 444, but it did still work
 after that, at least for a while.</DIV><DIV><BR></DIV><DIV>So:</DIV><DIV><BR></DIV><DIV>if my vna is accurate, the antenna should be fine on 2 meters.  <BR></DIV><DIV><BR></DIV><DIV>My
 concern is that when it is measured, it seems too short compared to the calculations.  Is it normal for a dipole to be 
about 80% of 1/2 wavelength?  It's copper wire, probably 14 gauge.  I was expecting 90-95% of simple wavelength calculation.  I haven't found anything in the literature concerning how much to trim, other than "a little at a time until it's swr is minimum for your frequencies).  <BR></DIV><DIV><BR></DIV><DIV>I don't want to hook it back up if I'm operating on bad data (from vna).</DIV><DIV><BR></DIV><DIV>Do any of you have a home-made, confirmed in-tune 2-meter antenna?  If so, what is it made of and what are the lengths of the elements?<BR></DIV><DIV><BR></DIV>I welcome suggestions.<DIV><BR></DIV><DIV>Richard<BR></DIV><DIV>kn6fxk<BR><BR></DIV></DIV>
</DIV>